Wind Turbine - Bornay | Wind Turbine Wind 25.3+
Wind Turbine - Bornay | Wind Turbine Wind 25.3+
Wind Turbine - Bornay | Wind Turbine Wind 25.3+
Wind Turbine - Bornay | Wind Turbine Wind 25.3+
Wind Turbine - Bornay | Wind Turbine Wind 25.3+
Wind Turbine - Bornay | Wind Turbine Wind 25.3+

Bornay | Wind Turbine Wind 25.3+

Regular price $11,500.00
Unit price  per 
Shipping calculated at checkout.

FREE SHIPPING

The Bornay small wind turbines, Wind 25.3+, goes a step further with the development of small wind technology to an extent unknown in this technology.

Under an aesthetic already known, Bornay has worked hard in an evolution towards more compatible, easier to install and better performance turbines.

Among the most notable changes, the new Wind 25.3+ is equipped with a permanent magnet neodymium alternator to a single output voltage of 220 Vac, for any application, providing maximum efficiency equipment.

The second major change is the handling of the control electronics, with 2 drivers for all applications: Controller MPPT for battery charging and interface for direct connection of all types of consumption, both AC or DC, or grid connection inverters.

The new drivers introduce a new machine control system, which incorporates voltage control and rpm, ensuring perfect machine control, while substantially improving the efficiency of the wind turbine.

Bornay technicians have spent 8 years on the development of their new range of small wind turbines, Wind+, and even collaborated with the UPV (Polytechnic University of Valencia). 

There have been interesting results at key points of development of small wind turbines:

Up to 20% more output,

lower startup speed,

efficiency alternator up to 96%,

compatible with all types of batteries (included Lithium),

new compatibilities with direct consumption,

remote monitoring...

With the Wind 25.3+, small wind turbine open a new stage, with many applications and integrations with other technologies. Some of the main characteristics of the new Wind 25.3+ wind turbine are:

Placement

  • Previous to the installation of the wind turbine.
  • Windspeed data logger.
  • Site parametrization
  • Selection of the ideal wind turbine.
  • Possible wind turbine improvements (blade diameter, power curve definition).

Maximum Efficiency

  • Power production at low windspeed up to 20% more than previous models.
  • Alternator efficiency up to 96%.

Security x 3

  • Three control systems improve the security of Wind + wind turbines:
    • Electronic controller
    • Wind + Speed Control
    • Tilting disorientation.

Modularity

  • Options to integrate the wind turbine into many applications:
    • ModBus communication
    • AC / DC applications
  • Direct uses (water pumping, motors ...)
Monitoring
  • Monitor your wind turbine thru Bvisual platform.
  • Monitor your renewable energy system:
    • Wind / solar production, battery status, inverter status, consumption...
    • thru VRM - Victron Energy Remote Monitoring (coming soon)

Remote control

  • Control your wind turbine remotely.
    • Change power curve parameters.
    • Reduce power peak production.
    • Actualization of firmware.
  • Protection mode in case of natural disasters.

Wind + Speed Control

  • Intelligent speed control system over the power curve
    • Cp
    • Lambda

Technical Specifications

  • Number of Blades: 3
  • Material: Fiberglass and Carbon Fiber
  • Direction of Rotation: Counterclockwise
  • Control Systems: Electronic Regulator and Passive by Tilting

Electrical Specifications

  • Alternator: Three Phases Permanent Magnet
  • Magnets: Neodymium
  • Nominal Power: 5000W 
  • Peak Power: 7500W
  • Nominal Voltage: 220 Vac
  • RPM: @400
  • Controllers:
    • Wind + MPPT Controller
      • Multi Voltage: 12, 24, 48 Vdc
      • Current: Max. 125 Amp.
      • Battery Type: Flooded, AGM, Gel, Lithium
    • Wind + Interface
      • Direct Water Pump AC or DC (Grundfos SQFlex)
      • Telecom
      • Grid Connection

Performance, Windspeed

  • Working Windspeed Range: 2-30 m/s
  • For Turn On: 3 m/s
  • For Nominal Power: 12 m/s
  • For Automatic Brake System: 14 m/s
  • Survival: 60 m/s

Physical Specifications

  • Wind Turbine Weight: 107 kg
  • Controller Weight: 30 kg
  • Packaging Dimensions - Weight
    • 120 x 80 x 80 cm - 160 kg
    • 260 x 40 x 15 cm - 22 kg
  • Total: 0.91 m^3 - 182 kg

Controller Packages:

Wind + MPPT Controller

  • Multi Voltage: 12, 24, 48 Vdc
  • Current: Max. 125 Amp.
  • Battery Type: Flooded, AGM, Gel, Lithium

Wind + MPPT Charge controller rectifies, controls, and filters the energy produced by the wind turbine, supplying energy suitable for battery charging. The Maximum Efficiency MPPT tracker optimizes and generates the maximum possible energy output from the wind turbine.

The Wind + wind turbine supplies three phase AC energy at a nominal voltage of 220 V. While the Wind + MPPT Charge controller does all functionalities to rectify and extract the maximum power available from the wind, supplying DC energy at 12, 24 or 48 volts to the battery bank.

The MPPT Charge Controller includes all security and control systems, with programmable configuration and control available to all kinds of wind conditions.

  • Wind Turbine Input
    • Input: Three Phases AC
    • Connectors: MC4
    • Operating Voltage Range: 80-480 Vac
    • Maximum Voltage: 510 Vac
    • Maximum Power: 3000W (Wind 13+) / 6000W (Wind 25+)
    • Braking Resistance: 5000W (Wind 13+) / 10000W (Wind 25+)
    • Overvoltage Protection: Varistors
  • Output
    • Current: DC
    • Connectors: 2 x M10
    • Output  Voltage: 12 / 24 / 48 Vdc
    • Protection: Output protected with a 125 Amp Fuse
  • Operationals
    • Stand-by Consumption < 3W
    • Max. Power Consumption < 30W
  • Connections
    • Anemometer: Yes, Optional
    • Communications: 2 x RS485 / 1 x RS232
    • USB: 1 x mini USB Type B Female
    • Bluetooth: Optional with Bornay Bluetooth Dongle
    • Emergency Stop: Yes, Brake Switch
    • Remote Emergency Stop: Yes, with External Interrupter
    • Relay: Potential Free Relay, COM, NO, NC
    • Digital auxiliary inputs 2
  • Physical
    • Enclosure Rate: IP20
    • Material: Aluminum
    • Color: RAL7035
    • Cooling: Forced Ventilation
    • Mounting System: Wall Installation
    • Dimensions: 508 x 597 x 190 mm
    • Packaging: 585 x 660 x 275 mm - 0.10 m^3
    • Weight: 30 Kg (Wind 13+)

Wind + Interface

  • Direct Water Pump AC or DC (Grundfos SQFlex)
  • Telecom
  • Grid Connection

    Interface Wind + rectifies, controls, and filters the energy produced by the wind turbine, and supplies energy suitable for use in different applications:

    • Grid connection, interface supply direct current to a grid connection inverter. Available with ABB Wind grid connection inverters.
    • Water pumping, interface supplies energy directly to the water pump, direct current to work with pumps like or alternate current at 230 V three phases to work with any kind of pump or motor.
    • Telecom, this interface delivers direct current to supply directly to the telecom rectifiers or alternate current to the telecom inverters, depending of the telecom electronics manufacturer.

    ModBus Communication, allows us a bi-directional communications between the different components of the system: for energy management, monitoring, parameters change ...

    • Wind Turbine Input
      • Input: Three Phases AC
      • Connectors: MC4
      • Operating Voltage Range: 80-480 Vac
      • Maximum Voltage: 510 Vac
      • Maximum Power: 3000W (Wind 13+) / 6000W (Wind 25+)
      • Braking Resistance: 5000W (Wind 13+) / 10000W (Wind 25+)
      • Overvoltage Protection: Varistors
    • Output
      • Current: CA / CC
      • Connectors: MC4
      • Voltage Range: 80-380 Vac / 100 - 450 Vac
      • Protection: IGBT
    • Operationals
      • Stand-by Consumption < 3W
      • Max. Power Consumption < 30W
    • Connections
      • Anemometer: Yes, Optional
      • Communications: 2 x RS485 / 1 x RS232
      • USB: 1 x mini USB Type B Female
      • Bluetooth: Optional with Bornay Bluetooth Dongle
      • Emergency Stop: Yes, Brake Switch
      • Remote Emergency Stop: Yes, with External Interrupter
      • Relay: Potential Free Relay, COM, NO, NC
      • Digital auxiliary inputs: 2
      • Digital Outputs: Pulse frequency output to synchronize with inverters that allows F-P power curves signal
    • Physical
      • Enclosure Rate: IP20
      • Material: Aluminum
      • Color: RAL7035
      • Cooling: Forced Ventilation
      • Mounting System: Wall Installation
      • Dimensions: 
        • 399 x 494 x 190 mm
        • 220 x 490 x 353 mm (Optional Telecom Rack)
      • Packaging: 280 x 480 x 560 mm - 0.08 m^3
      • Weight: 14 Kg (Wind 13+)
      • Packaging Weight: 16.5 Kg

    3 Year Warranty

    Bornay Catalog

    Wind 25.3+ Manual

    MPPT Info Sheet

    MPPT Manual

    Interface Info Sheet

    Interface Manual